Category hiclover

2019-05-18 Новости компании264 просмотра

Компания Nanjing Yixiou привлекла еще одного нового клиента в области очистки промышленных сточных газов и водоочистки. Из-за бюджетных ограничений предыдущего владельца заказчик выбрал самый экономичный тип фильтра для рольставен нашей компании – воздушный фильтр для рольставен с ручным управлением. используется в звене предварительной фильтрации воздуха в программе очистки выхлопных газов. Применение роллетного фильтра при очистке выхлопных газов может снизить стоимость ручной замены фильтра и поддерживать оборудование в непрерывном рабочем состоянии без остановки машины в максимальной степени.

Все больше и больше клиентов инженерных компаний, занимающихся защитой окружающей среды, выбирают автоматический воздушный фильтр-занавес Ecolead от Nanjing Yixi, что является признанием и доверием к нашей продукции. Это также доказывает, что фильтр с воздушной заслонкой является наиболее разумной заменой традиционным пластинчатым и рамным фильтрам, и это тенденция и тенденция выбора фильтра.

Nanjing Clover Medical Technology Co.,Ltd.

Tel: +86-13813931455(WhatsApp)

Website: www.hiclover.com

Email: [email protected]

Email: [email protected]

Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500

HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)

The successful Bidder shall inform CEB in writing at least three (3) weeks prior to the carrying out of factory tests

so as to enable sending of a CEB Engineer for witnessing  of  the  factory  tests.    A’Factory  Acceptance  Test

‘  schedule  shall  be

 

mutually agreed between the successful Bidder and the CEB Engineer.

NOTE: All fees inclusive of air tickets, food & hotel accommodation, local transport and other living expenses

for the CEB Engineer shall be borne by the successful Bidder.

The successful Bidder shall submit to the CEB Engineer the following documents prior to dispatch of the incinerator

set. Certificate of Conformity inclusive of this clause’We certify that, subject to exceptions or concessions

listed here after, the supplies detailed above were fabricated in compliance with the technical specifications of the

contract, order and that, all inspections and tests having been completed, the supplies comply in every aspect with the

relevant particular specifications, drawings, and relevant standards and regulations in force’.

?     Factory Acceptance Test(FAT) Certificates

?     Three(3) Complete Sets of As-Built Drawings

?     Installation and commissioning procedure for the incinerator set.

?     Program of works for carrying the installation and commissioning

?     Labour  and  logistic  requirement  for  carrying  out the installation  and commissioning.

?     All electrical drawings and wiring diagrams

Type of Waste: To deal with medical waste, categories A, B, C, D,E

Type of incinerator: Pyrolytic

Nominal Burn Speed: 50 to 60 Kg/hrat  3500Kcal/Kg

Loading: Manual, Batch Load

De ashing: Automatic or manual batch de ashing

The incinerator must prevent the discharge of black smoke and

fine dust, during the loadings

Main Chamber Capacity: 2 -3 m3

The insulation of the combustion chamber should be composed of

refractory bricks, using a high content of aluminium and insulates,

The plate of combustion in carborundum preventing the fixing of

glass and slags

Hours of operation/day: >10 hrs

Max operating Temperature: 14000C

Normal Operating Temperature (Main ): >8500C

Operating Temperature (Secondary): >11000C

It should have temperature regulators in electronic watch:

Carbon Content of Ash: <2%

The setup should be wholly free of visible smoke as well

as offensive odours.

Residence Time in Second Chamber: 2 seconds minimum

The Internal diameter of the Chimney: Ø 400

Height of Stack:  >8 m

Burner performance: Automatic On/Off

Fuel: Diesel

Fuel Consumption at rated capacity: >7 Kg waste/ltr

Electricity Consumption: <2kW at rated capacity

Operating Voltage: 220-240VAC 50 Hz

Spare Parts: Supply for 1 year quoted as alternative

Consumables: Supply for one year of performance to be mentioned

as alternative

Warranty: Parts and service support: 1 year minimum article

commissioning

Service Support: <72 hours.

Emission Standards Compliance: BS 3316 or équivalent standard

Process Filtering system: Scruber to be mentionned as alternative

CE Manufacturing Compliance: BS EN 746-2-1997

Design Specification: Types A, B, C, D, and E of medical waste

Installation and Commissioning: Contained in conditions of supply

Training in preventative and curative maintainance and use

of the incinerator: Operator training inclusive in provide

Capacity to treat Plastic: Not less than 40% by weight

Shed of the incinerator

Shelter of the incinerator inclusive in offer (the shelter must have

facilities for hand washing and firefighting).

This material and equipment must include in the drop of the

incinerator:

*   Foundation in rubble stone,

*   Isolation roofing against humidity;

* Elevation with brick of 20 cm (bloc cement), continuing lintel

(linteau) in reinforced concrete;

*  Steel frame (charpente en metal);

* Roofing in sheet B.C.A. 28 BG (Toiture en tôle),metal gutter,

*  Sanitary installation (wash basin, soak way pit of 20 m of depth);

*  Ash pit of 30 m3,

* Electrical installation;

* Concreteslab for fixing the incinerator;

* Chanel for evacuation of rain water or waste water

*  Wiremesh for aeration up the lintel;

* smoothrougtcasting of walls (interior and outside);

* plinth with cement;

*  2 metal doors;

*  Enemail paintings inside and latex paintings outside the shield

on walls and on doors;

*  Roofing limit (planche de rive);

*  Steps for this specification will depend on the size of this

incinerator which will determine the size of the drop of the incinerator.

on walls and on doors;

*  Roofing limit (planche de rive);

*  Measures for this specification will depend on the size of the

incinerator which will determine the size of the shed of the incinerator.

INCINERATOR WITH CONTROL UNIT

Has been specifically designed for use in:

– Hospitals

– Clinics

– Laboratories

– Disaster relief Operations

– Animal Cremation

– Can be used to eliminate medical waste with reliable, on site

technology

 

An innovative system for medical facilities.  It has been designed to

eliminate hospital waste (including infectious and pathological waste)

efficiently, and with a minimum of expenses.  Existing personnel can

be instructed on the use of this product.medical incinerator prices

 

The operator opens the primary chamber door, places the waste

inside and turns on the unit.  A timed cycle preset by the operator

begins and the waste is reduced to 5% ASH BY VOLUME.

 

– Incinerates up to 8 cubic feet (0.22 cubic meters) per load, which is

normally 330 ibs (150kg) per (8 hour) day.

 

– Designed by specialists in portable systems.

– No on site construction

– Minimal training for operators.

 

 

– Built for safe, easy operation with state-of-the-art controls.

– Dual chamber combustion and high exhaust temperatures, if

required, in excess of 1025◦C.

– Preset cycle time automatically controls start up and shut down

– Thermostatic temperature control insures efficient fuel consumption.

Power requirement: 220 V, 0.35 KW/hr

 

standard type, 11m long,self supporting

Capacity-220kgs/hr

refuse-hospital waste

average moisture-15-20% on fist time

DIMENSIONS

height: 2710mm

span: 2840mm

Width; 2450mm

loading door opening: 610mm x 610mm

Grate/Heath Area: 2.0(square meters)

Primary chamber volume: 2.4(cubid  meters)

secondary chamber volume:2,72(cubid meters0

total quantity: 5,12(cubid meters)

minimum stack diameter:560mm

 

1. 300 kg per day healthcare waste incinerator

 

 

 

Our preferred technology is double-chamber incineration, but if you advocate an alternative technology, that’s

acceptable also.

 

 

 

We request information on the following for all the aforementioned requirements:

 

 

 

1. Capital cost (delivered cost in Oman)

 

 

 

2. Operation and maintenance costs (per year)

 

 

 

3. Number of operators required

 

 

 

4. Product specifications (sizes, temperatures, residence time, cycle time etc)

 

 

 

5. Other auxiliary equipment that is required or recommended by you

 

 

 

6. Any other information and inputs that can facilitate the project and add value

 

 

1. Would this mean that the plant would operate only 12 hours per day? Normally operating the station 24 hours

Each Day should be able to valorize 12 tons per day for an installation with a capacity of 500 kgs/hr.

En 2010, nous livrons 05 ensembles d’incinérateur de fioul modèle YD-50 pour la Moldavie, près de la mer Noire et de l’Ukraine. Le conteneur a été expédié au port d’Ilyichevsk.

Incinérateur de modèle régulier pour le marché avec un taux de combustion de 10 kg à 500 kg par heure et nous proposons toujours au client de nous envoyer les détails dont il a besoin, comme les déchets, le carburant et l’alimentation électrique du site local, le temps de fonctionnement de l’incinérateur, etc., afin que nous puissions proposer le bon modèle ou personnalisé fabriqué avec une structure ou des dimensions différentes.

Modèle		YD-50
Taux de combustion		50 kg / heure
Capacité d’alimentation		150 kilogrammes
Chambre de combustion Paimary		900 litres
Chambre de combustion secondaire		300 litres
Mélanger la chambre de combustion		Oui
Chambre de filtre à fumée		Oui
Mode d’alimentation		Manuel
Tension		220V / 380V
Pouvoir		0,7 kW
Type de carburant		Huile diesel / gaz naturel / GPL
Brûleur		Italie Original
Consommation d’huile (gasoil)		12,1 à 23,9 kg / heure
Consommation de gaz (gaz naturel)		9,9 à 26,1 m3 / heure
Dimensions internes		120 x 90 x 85 cm (chambre paimary)
Dimensions extérieures		200 x 160 x 310cm (sans cheminée)
Moniteur de température		Oui
Capacité du réservoir d’huile (si carburant d’huile)		300 litres
Ouverture de porte		62 x 80 cm
Longueur de la cheminée		5,0 mètres
Type de cheminée		Acier inoxydable
Poids brut de l’équipement		4000 kilogrammes
Spécifications techniques de fonctionnement
Température de la chambre Paimary		800 ℃ –1000 ℃
Température de la chambre secondaire		1000 ℃ -1200 ℃
Temps de résidence		2,0 sec.
Efficacité de combustion		＞ 98%
Déchets de puissance calorifique inférieure		3000Kcal

2019年05月18日 公司新聞 194 views

此次項目中標前期經歷為時數月的產品對接，包括技術人員的產品技術探討，銷售人員的商務價格條款商議，最終我公司在激烈的競爭中脫穎而出，獲得了京東方和中建一局工作人員的信任和支持，拿到了該項目的合同。由於交貨周期短，我司將於2016年國慶節期間加班完成該訂單的生產工作，儘力配合施工單位（中建一局）和業主（河北京東方）的交貨日期。

Nanjing Clover Medical Technology Co.,Ltd.

Tel: +86-13813931455(WhatsApp)

Website: www.hiclover.com

Email: [email protected]

Email: [email protected]

Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500

HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)

  京東方（BOE）創立於1993年4月。核心業務包括顯示器件、智慧系統、健康服務。產品廣泛應用於手機、平板電腦、筆記本電腦、顯示器、電視、車載、數字信息顯示、健康醫療、金融應用、可穿戴設備等領域。
      京東方（BOE）堅持“技術領先、全球首發、價值共創”的創新理念。2015年，全球首發產品覆蓋率39%，2016年上半年已突破40%，2015年新 增專利申請量6156件，累計可使用專利超過40000件，2016年上半年新增專利申請量突破4000件，同比增長25%，繼續保持業內第一。全球創新活動的領先指標——湯森路透《2016全球創新報告》顯示，京東方（BOE）已躋身半導體領域全球第二大創新公司。此外，京東方（BOE）智能手機液晶顯示屏、平板電腦顯示屏出貨量市佔率位列全球第一，顯示器顯示屏和電視顯示屏市佔率全球第二。
       目前，京東方（BOE）擁有北京第5代和第8.5代TFT-LCD生產線、成都第4.5代TFT-LCD生產線、合肥第6代TFT-LCD生產線和第 8.5代TFT-LCD生產線、鄂爾多斯第5.5代TFT-LCD/AMOLED生產線、重慶第8.5代TFT-LCD生產線等7條生產線，還有一條建設 中的成都第6代 AMOLED生產線、一條建設中的福州第8.5代TFT-LCD生產線和一條建設中的全球最高世代線——合肥第10.5代TFT-LCD生產線，其中，成 都6代線已順利封頂，預計2017年投產。京東方（BOE）是中國大陸惟一能夠自主研發、生產和製造1.5英寸-110英寸全系列半導體顯示產品的企業。
      京東方（BOE）在北京、四川成都、安徽合肥、內蒙古鄂爾多斯、重慶、河北固安、江蘇蘇州、福建廈門等地擁有多個製造基地，營銷和服務體系覆蓋歐、美、亞等全球主區。